User manual

DVO Effects
274
© 2014 Digital Vision
UM-2014.1-07
This is normally set to Green as more luminance (detail) is available
in the component.
Fixed Colour
Select the component (Red, Green or Blue) to which all other should be
locked.
Values :
Red, Green, Blue
Default :
Green
Normally select the component that is most aligned/stable.
Max Offset
Set the maximum adjustment that can be done in pixels.
Range :
0 - 1000
Default :
100 pixels
Analyze Mode
Determines how extensive an analysis is performed.
Values :
Normal, Extended
Default :
Normal
Normal - Works for most types of material
Extended - For more difficult material and highest safety. Slower.
Picture Noise
Values :
Low, Normal, High
Default :
Normal
Describes the noise level of the image.
ROI Margins
Sets the region for analysis. For best results in some cases, the frame
borders can be included in the analysis. However if picture content is not
locked to frame borders, it might be necessary to exclude frame borders
using the Region Of Interest control. Individual control for Left/Top/Right/
Bottom in pixels (starting from the image edge).
Range :
0 TO 1000
Default :
0