User manual

DVO Flicker

273

UM-2014.1-07

DVO Print Align

DVO Print Align uses a fully automatic process to align RGB separation

prints, even if the offset varies over time.

Basic Setup

Enable

This toggle button allows you to enable/disable the effect. By default, as soon

as the effect is added it is applied/enabled.

Colour

The drop-down list will default to the project setting for the input format. You

need to set this control according to the material that you are working with. If

the footage was shot with a video camera, select a linear format. If this

control is not set correctly the material may not be processed properly.

Default :

From Project

Controls

Reference Colour

Select the component (Red, Green or Blue) that should be used as the

reference.

Values :

Red, Green, Blue

Default :

Green