User manual

DVO Effects
272
© 2014 Digital Vision
UM-2014.1-07
Black Level Save
Black Level Save lets us enable specific processing to preserve black levels
in the sequence.
If enabled, the Low and High parameters are used to assign the level of
processing performed at the lower (blackest) end of the input sequence. Both
Low and High are 10 bit numbers and limited to values between 0 and 100
(out of the full 10 bit range, 1024).
Low
Range :
0 to 100
Default :
0
If the input level is less than or equal to the setting for Low, no flicker
adjustment is performed and the input signal is untouched.
High
Range :
0 to 100
Default :
1
If the input level is greater than or equal to the setting for High, full flicker
adjustment is performed.
In between these values, there is a soft transition between none and
full processing.
Chroma
The Chroma button enables the removal of chrominance flicker (i.e."colour
breathing").
The Chroma toggle removes luminance flicker as well (if present).
However, for best performance, leave Chroma off unless you have
chrominance flickering to remove.