User manual

DVO Effects
262
© 2014 Digital Vision
UM-2014.1-07
Values :
Spatial, Mixed 1, Mixed 2, Mixed 3, Mixed 4, Temporal 1,
Temporal 2, Copy Prev, Copy Next, Bypass
Default :
Temporal 1
When the Max Filter is enabled, the normal filter used for the adaptive filter
sizing will take care of the small dirt. When the upper size limit is reached it
will automatically switch over to the filter selected here.
The filter used here would typically be a larger temporal filter.
The Max Filter can also be set to Bypass, which will leave big stains
unprocessed. These can be processed later by a de-blotcher or 3rd party
software.
Size
This specifies the size of the spatial part of the filter (for spatial and mixed
filter types).
Use a large value when processing large bits of dirt.
Range :
0 to 15
Default :
3
Motion
Width
Motion W idth is used in combination with the Motion control in the
Processing section and defines the motion adaptation behaviour. When
motion width is set to 0, the motion setting will be used as a threshold
discriminating between moving and non-moving parts. When motion width is
set to a non-zero value, the classification will change gradually from “no
motion” to “full motion”. Motion width then specifies the size of the transition
region.
Range :
0 to 255
Default :
30