User manual

DVO Effects

260

UM-2014.1-07

Values :

Dirt On Luma, Dirt On Red Input, Dirt On Red Output,

Difference

Default :

Dirt On Luma

Where :

Dirt On Luma - The detected scratches/dirt are high-lighted on a

monochrome input picture with lowered luminance.

Dirt On Red Input - The detected scratches/dirt are shown with red

on the unprocessed input signal.

Dirt On Red Output - The detected scratches/dirt are shown with

red on the processed output signal.

Difference - The difference between the unprocessed input and the

processed output is displayed.

Colour

The drop-down list will default to the project setting for the input format. You

need to set this control according to the material that you are working with. If

the footage was shot with a video camera, select a linear format. If this

control is not set correctly the material may not be processed properly.

Default :

From Project

History Required

The DVO Dust effect is recursive.

Recursive means the result for any given frame depends on the

result of the previous frame(s).

For best results a certain amount of frame history needs to be built up, and

this numeric slider is used to specify how many frames of history to use.

Range :

0 to 15

Default :

5 frames

Use Handles

The Use Handles button controls whether the history includes available