User manual

DVO Effects
258
© 2014 Digital Vision
UM-2014.1-07
Other Settings
Signal
This selects the signal (channel) within which scratches/dirt will be
detected.
Values :
Y,U,V,R,G,B,Y+U+V
Default :
Y
The adaptation works on one channel only, normally 'Y'. By setting the
signal to 'R', for example, when only red scratches are visible, the DVO
Dust will more precisely detect the dirt, minimizing the risk of affecting
actual picture content.
Motion Estimation
This drop-down button allows you to choose the motion estimation.
Values :
off, normal, best
Default :
normal
When enabled, the motion estimation module gives a performance
boost, both in dirt detection and concealment. This means that much
more aggressive settings can be used without introducing smearing.
Scene Change
This drop-down button gives options for how to process the frames
surrounding an edit/cut point:
Inside - processes the frame before a cut using only the current and
previous frame, and processes the frame after a cut using only the
current and next frame. Stays inside the shot.
Across - ignores cuts, use the previous, current, and next frame.
Goes across shots.
Bypass - doesn't process the frames before or after a cut.