User manual

DVO Dust
257
© 2014 Digital Vision
UM-2014.1-07
or
set the contrast threshold to a low value
or
set the contrast threshold to a high value
Contrast Adaptation Limits
The contrast adaptation low and high limit controls only work in the adaptive
mode and are used to specify the range of contrast settings that the
adaptation is allowed to work in.
The upper limit is normally set to the non-adaptive contrast setting you
normally use. If both limits are set to the same value the result is exactly the
same as when using non-adaptive contrast.
Low
Range :
0 to 63
Default :
5
High
Range :
0 to 63
Default :
30