User manual

DVO Dust
255
© 2014 Digital Vision
UM-2014.1-07
current, and next field/frame.
Default :
On
Having this option on ensures higher sensitivity and reduces artefacts down to
a minimum.
For maximum filtering, the control may be set to off.
MDC filter configuration is done inside the Setup section.
Edge
This controls material edge protection.
Edge protection acts as a safety measure and reduces the possibility of false
scratch detection. Some material may require this protection e.g. houses at a
distance, a forest or material with a slight weave. By turning edge protection
on, the built in edge detector will affect were DVO Dust filters and it will reduce
filtering where it finds edges.
Default :
On
Edge protection should normally be left on.
Further controls for defining thresholds for edges are available in the Setup
tab.
Edge parameter configuration is done inside the Setup section.
Temporal Adaptation
Temporal Adaptation acts to exclude falsely detected dust/dirt from being
processed. It does this by comparing dirt detected on the current frame with
dirt detected on the previous frame (within a sizable window).
This toggle button turns temporal adaptation on/off.
Default :
Off
The temporal adaptation settings can be found in the Setup tab.
Black / White
There are two separate and independent parameter groups controlling the
processing for Black (dark) and White (light) areas of dust/dirt.