User manual

DVO Effects

254

UM-2014.1-07

Filter Size

This sets the size of the filter on the current frame, so it is only required for

spatial and temporal filters.

Use the numeric slider to define the filter size when adaptive filter sizing is not

enabled. The larger the size of the dirt the larger this value should be.

Range :

0 to 15

Default :

Adaptation

The

Adaptation

toggle button allows you to turn the adaptation processing

on/off.

When this button is off, DVO Dust works in global mode, filtering the whole

image with the same fixed filter selected in the Filter menu.

Note that if the

Adaptation

button is off then none of the

adaptation controls above will have an effect.

Motion

This numeric slider configures the degree of motion sensitivity.

Initially you can set it to 0 (most safety), for maximum motion sensitivity, and

then increase it in steps if there isn't enough filtering in moving parts of the

picture.

A value of 256 corresponds to no motion adaptation at all, which means that

temporal filtering can be applied fully to moving parts of the image.

Range :

0 to 256

Default :

MDC

The

MDC

(Motion Detection Current) toggle button determines whether to

look at just the previous and next field/frame, or to look at all of the previous,