User manual

DVO Effects
250
© 2014 Digital Vision
UM-2014.1-07
Enable Basic
The Enable Basic toggle button allows you to enable/disable basic mode.
This mode uses presets to automate and hide much of the effect complexity.
When you edit any of the settings in the processing or setup tabs the
basic mode becomes automatically disabled. Similarly, when you
select a mode from the basic modes, all settings will be
automatically adjusted to fit the selected mode and basic mode will
be automatically enabled.
Presets
This is a collection of preset settings (e.g. Extra Light, Heavy etc.) that setup
the effect for a predefined level of dust/dirt.
Values :
Extra Light, Light, Medium, Heavy, Extra Heavy
Default :
Medium
Strength
This slider allows the adjustment of the strength of dust reduction processing
to use. It is only available in basic mode.
Range :
-5 to +5
Default :
0
Enable White / Enable Black
White/black dirt removal is enabled via the corresponding Enable White/
Enable Black toggle buttons.