User manual

DVO Stereo Fix
245
© 2014 Digital Vision
UM-2014.1-07
Scene Mode requires proper scene edits as normally one scene will
behave very differently to another.
Frame Mode
Values :
Disable , Uniform , Non-Uniform
Default :
Disable
Sets the colour matching mode which is applied per frame individually.
The processing and modes are the same as described above for Scene
Mode.
This option can be used as an alternative to Scene Mode processing
if it appears that colour differences change on a frame by frame
basis. It is recommended that Scene Mode processing be Disabled
when used.
Local Mode
Values :
Disable , Normal
Default :
Normal
This option allows for more localised colour match processing than found in
Scene or Frame Modes. The Area Size and Sensitivity controls are linked to
Local Mode processing.
Area Size
Values :
X-Small , Small , Medium , Large , X-Large
Default :
Medium
The smaller the Area Size is the more locally aggressive it can be
considered to be.
Sensitivity
Values :
0 - 1023
Default :
64
The Sensitivity parameter is used to control the allowed difference
ranges. The values we set correspond to 10 bit levels. The effect of
Sensitivity is as a safety measure rather than a processing amount.
To speed up the processing of complete scenes/material, Local
Mode processing can be disabled.