User manual

DVO Effects

242

UM-2014.1-07

View Controls

Mute

Mutes both the colour match and the align match, as well as any associated

border/blanking modes.

The parameters in this section regarding view and orientation remain active i.

e. SwapEyes/ViewMode/Mirror/Flip.

This can be used to compare before and after while correcting any

necessary mirror/flip.

Swap Eyes

Swaps left and right eye on output.

All parameters referring to either left or right are associated with the source

left and right tracks. As such, the actual processing is not affected by

swapping eyes on the output.

View Mode

Values :

Normal , Blended , Side-By-Side

Default :

Normal

This control allows different view modes to be applied on the output and is

used mainly for visualisation purposes.

Normal

Separate left and right outputs.

Blended

Blends left and right image, which could be used to verify

alignment processing.

Side-By-Side

Displays left and right images side-by-side with halved

horizontal resolution.

If this mode is used to verify colour matching

simultaneously, please note that many monitors might

have colour reproduction which varies spatially or by

viewing angle.