User manual

Stereo Multitrack

186

UM-2014.1-07

Track

Stereo

SDI Output

Left

Right

You can reverse this order via the toolbar button :

or by changing the general.prefs parameter :

reverseStereoOutput

This parameter is inside the IOCard section of the preference file.

Viewing

You can view and compare the two stereo channels by choosing a compare

mode between the two tracks. Compare modes are described in the

Comparison Mode section.

Multitrack Grading

You can grade both stereo channels at the same time (and apply notes to

both channels) by enabling Multitrack Grading.

Switch to Memories mode :

Then, switch to Shots mode and enable Multitrack Grading using the button

shown below :