User manual

Setting Up Stereo

185

UM-2014.1-07

Preferences / Monitoring/VideoIO : Enable SDI I/O Card

Interlaced DVI

Output of interlaced stereo through DVI to a supported display device.

If your stereo display device uses an interlaced DVI signal, enable this

via :

Preferences / Monitoring/VideoIO : Interlace Stereo DVI Output

Interlaced Stereo mode is incompatible with OpenGL read-

back and will be hidden if read-back is enabled.

Using Stereo

If Stereoscopic Output is enabled for a project, stereo display output will be

sent to the configured stereo display device (SDI or DVI) automatically.

Composition tracks V1 and V2 will both be sent to the display device as the

left and right stereo channel.

Stereo channel SDI output order :