User manual

161
© 2014 Digital Vision
UM-2014.1-07
this option you allow the scene detector to insert edits where the scene
change actually occurs. If this options is turned off, then the edits will be
inserted on the frame boundary rather than where the scene change
actually takes place.
Colour
Scene detection is dependent on the material colour format and
especially whether the input is linear or logarithmic. The default setting
will be taken from the project colour scaling setting. Setting the incorrect
value here may result in incorrect scene change detection.
See The Setup Manual for a discussion of colour scaling.
Panel Audio Notify
Enabling this will cause an audible notification when a scene change is
detected. The sound is produced via the control panel.
Usage
Once you have adjusted the settings, switch back to the T im eline tab and
move the active playhead to the start of the segment you want to divide up.
The video track needs to be enabled for scene detection to work.
Turn on the Scene Detect button to start the scene detection process :
You will see the edits appearing on the timeline and a progress report will be
shown in the Library screen :
To stop scene detection at any point just toggle off the scene detect button.