Specifications

20 Multi Axis Engraver Operating Manual
7) Move the object you are engraving forwards or backwards until the center of the object directly below the center of
the spindle. Next, tighten the vertical movement adjustment knob.
Level Surface Engraving
When engraving round items that have a straight edge to engrave on, you need to make sure that the tilt adjustment is set
for straight and not angled at all. To do this, loosen the tilt adjustment knob as shown in figure 3.15 below.
(Figure 3.15) The tilt adjustment knob
Next, tilt the clamping assembly up and down while tightening the tilt adjustment lock screw shown below in figure 3.16.
This is a locking screw and will lock the assembly in an exact 90 degree position from the spindle.
(Figure 3.16) The tilt adjustment lock screw