User manual

Vision Max Pro User Manual118

Select the Engrave icon from the left side toolbar, then select the color for cutting in the Filter Layer

drop down box in the Filter by Color window (select Red for this example),

then select Engrave from the Cut Toolbox. The screen will show only objects in the color selected in the

Filter by Color window.

The page selection screen will re-appear, for this example, choose Current Page and select OK. The

file will be sent to the engraver. Make sure you have installed the cutter/beveler tool for this process and

set up the cutting depth as described in the previous section. When the file is complete, it should

appear as shown. (The outside/excess material was removed in the picture below for clarity)