Operating instructions

Page 3
■ Package Contents
① Main unit. P/N_MX0408-310.
② 12VDC Power Supply.P/N_VDC1204
③ 1x Remote. (Battery type: CR2025 3V)
④ 1x IR_RX(IR receiver extension cable).
⑤ 4x IR_TX(IR emitter cable).
⑥ 1x RS232 to RS485 convertor.
⑦ 1x USB to UART cable.
⑧ Operating Instructions. P/N_INS MX0408-310.
 NOTE1:
PART NUMBER (Abbreviation as P/N).
■ Connections and Operations
1) Connect the HDMI input sources ( such as HD-DVD, PS3, STB etc )
into MX0408-310.
2) Connect the HDMI outputs (such as HD-LCD, HD-DLP) into MX0408-310.
3) Power on the input source you want to show. (
Keep the unused input
power off, otherwise it may interfere the normal display ).
4) Connect the power supply into MX0408-310 and turn on the display you
want to watch.
5) Use remote or push the button to choose input source. Extra infrared
receiver extension, IR emitter, RS485 and Ethernet port are supplied for
remote control.
6) IR calls back from remote rooms to control the HDMI Matrix function.
Enable the function: press the output2 selection button and the key lock
button at the same time for about 3 seconds. After all the output1 LEDs
and the output2 LEDs flash once, the function is enabled.
Disable the function: press the output2 selection button and the key lock
button at the same time for about 3 seconds. After all the output1 LEDS