Assembly Instructions

Parts List
Congratulations on your purchase of this Vision Vinyl
Storage Building! As with any construction or assembly
project, please exercise caution when using tools and
equipment to install this structure. Be sure to read and
follow the instructions contained within this manual
prior to assembly. If you have any questions before,
during or after assembly, please contact the Vision
Help Line at 1-866-633-9970. We welcome your call
and will be glad to assist you in any way we can.
Assembly Safety Tips
• Use proper lifting procedures when handling the
packages.
• Take care when handling the individual components
and wear gloves to avoid cuts or scrapes.
• Follow proper operating procedures for any tools,
ladders, etc. used when assembling the building.
• Protect your eyes. Always wear safety glasses when
assembling building and when using power tools and
hammers.
• Do not assemble building during high winds.
• Do not assemble building if parts are missing. A
partially assembled building may be seriously
damaged by high winds.
• This building must be anchored to the foundation to
prevent wind damage. Follow anchoring instructions
accordingly.
NOTE: Before assembly of this structure –
Please take a complete inventory of the parts and
components contained in the shed pallet/package and
compare with the parts list and parts identication dia-
grams shown on the next few pages. If any parts are
missing, please contact the Vision Help Line. DO NOT
ATTEMPT TO ASSEMBLE THIS PRODUCT IF ANY
PARTS ARE MISSING OR DAMAGED.
Please do not attempt to return this product to the
store where you purchased it. For assistance or parts
replacement, call the Vision Help Line at 1-866-633-
9970.
PRODUCT LENGTH
PRODUCT DESCRIPTION NO. (INCHES) QTY
Wall Panel WP1 71.5 20
Roof Panel RP1 59.5 20
Corner Post CNR 71.5 4
Sloped Wall Panel WP2 76 2
Sloped Wall Panel WP3 79 2
Sloped Wall Panel WP4 81.937 1
Sloped Wall Panel WP5 84.937 1
Sloped Wall Panel WP6 87.875 1
Sloped Wall Panel WP7 89.875 1
Sloped Wall Panel WP8 76 2
Sloped Wall Panel WP9 79 2
Sloped Wall Panel WP10 81.937 1
Sloped Wall Panel WP11 84.937 1
Sloped Wall Panel WP12 87.875 1
Sloped Wall Panel WP13 89.875 1
Door Header Door Header 1
Roof Gable End [A] RGA - 59.25 2
Roof Gable End [B] RGB - 59.25 2
Ridge Cap RBC 1 - 92.875 1
Fascia FC1 - 48.375 4
Doors - left and right. Includes pre-installed Door Panel 2
aluminum astrigal and hinges
Gable End Cap Gable End Caps 2
Vent Cap (set of 2 ea. inside/outside pcs) Vent Caps 2
Steel Reinforcement Reinforcement 6
FASTENERS
Hinge Screws For door hinges 12
#8 x 1" Pan Head Screws For wall & roof panels 150
#8 x 3/4" Pan Head Screws For base track 65
Vent Cap Screws For vent cap sets 4
2
ALUMINUM COMPONENTS
Aluminum Ridge Beam F512H01 1
Aluminum Sloped Side Wall Cap F512G01 2
Aluminum Door Lintel F512I01 1
Aluminum Door Frame Left Aluminum & Vinyl 1
Aluminum Door Frame Right Aluminum & Vinyl 1
Aluminum Base Track F512K05 3
Aluminum Base Track F512K04 2
Aluminum Base Track F512K03 2
Aluminum Base Track F512K02 2
Aluminum Base Track F512K01 2
Door Handle 2
Door Latch 2