Assembly Instructions

Afxing Hooks and Shelf Brackets
DO NOT INSERT SCREWS DIRECTLY IN THE JOINT BETWEEN TWO WALL PANELS.
It is recommended that fasteners be self tapping screws no longer than 1-inch long
and at least #10 in size. (Screws provided with certain hanging devices may be longer or
inappropriate for this application). Screws may be inserted using a power screw driver, driver
drill or manual screw driver. Bring screws to a snug t but do not overtighten.
DO NOT ATTEMPT TO COUNTERSINK SCREWS. DO NOT USE STAR-TYPE OR TOGGLE
(MOLLY) BOLTS
Follow hanging instructions that accompany the hooks or brackets relative to spacing
of supports and the number of fasteners to be used. Weight limits identied for the hooks,
brackets or shelf standards should be strictly observed.
21A
21B
Joint
20
Screws or other threaded fasteners to afx hooks, hangers and shelving, should be inserted
ONLY in the scored (indented) groove located 3/8" to the side of the seam created by the
joint of two wall panels (See Figures 21A and 21B).
Hooks, shelving and other storage devices can be installed on the walls of your Vision Vinyl
Shed just as simply as in your garage.
15