Installation Manual

VISION X XMC 7” LED HEADLIGHT
Connect White wire to
constant running light
power source.
Red = High Beam ( + )
Blue = Low Beam ( + )
Black = Ground ( - )
White = Halo ( + )
white
black
blue
red
H4
Plugs
WIRING DIAGRAM WITH H4 TO P-HLHI4 PLUG
[High Four Adapter] (sold separately)
Figure 4
Halo Connection Optional
P-HLHI4 Plug
Delphi’s
H4
Plugs
Halo Spade
Connector
H4 to Delphi Adapter
white
black
blue
red
WIRING DIAGRAM WITH H4 TO XMC-H42DELPHI PLUG
2014 AND UP HD TOURING MODELS (sold separately)
Red = High Beam ( + )
Blue = Low Beam ( + )
Black = Ground ( - )
White = Halo ( + )
Halo Connection Optional
P-HLHI4- High Low High 4 adapter engages all three beam
modes simultaneously to dramatically increase visibility and
output.
HIGH FOUR ADAPTER (sold separately)
Halo Low
High HLHI4
Gore-Tex Valve Cap [ON]
REMOVE
GORE-TEX VALVE
Be sure to REMOVE the Gore-Tex valve cap on the back of the
XMC Headlight before installing.
Gore-Tex Valve Cap [ON]
Figure 3
( - )
( + )
( + )
( + )
( - )
( + )
( + )
( + )
Figure 5