Installation Manual

VISION X XMC 7” LED HEADLIGHT
About The XMC 7” LED Headlight:
XMC 7” LED HEADLIGHT SPECIFICATIONS
1. Warranty
2. Amp Draw
3. Input Voltage
4. LED Lifespan
PREPARATION
1. We recommend completely reading instructions before
installing.
2. Consult your local state regulatory agency regarding the
use of LED lighting.
3. The placement of LED lighting should not restrict airfl ow to
the radiator, or block head lamps, turn signals, or parking
lights.
PACKAGE CONTENTS
1. XMC-7RD / 7RDB LED headlight.
2. Instructions.
ATTENTION
Important: Due to the increase in light output, we recommend
you take the vehicle to a dealer to have the Headlight properly
adjusted. Weight and tire pressure can aff ect the position of the
light.
Fitment: 2014 and Up Harley Davidson Motorcycles with dual
halogen bulbs (except Road King) will require an adapter,
Part #: XMC-H42DELPHI. (sold separately)
See Wiring Diagram, Figure 3.
Fitment: 2014 and Up Harley Davidson Road King models will
require an adapter, Part #: XMC-H42H9H11. (sold separately)
See Wiring Diagram, Figure 2.
Fitment: We recommend the Hi/Low adapter,
Part #: P-HLHI4 (sold separately). Engages all three beam
modes simultaneously to dramatically increase visibility and
light output. See Wiring Digram, Figure 4.
The P-HLHI4 is not required on:
2014 & Up Street Glide FLHX
2014 & Up Electra Glide FLHT
2014 & Up Ultra Limited FLHTK
2014 & Up Road King
! !
MAINTENANCE
1. All Vision X models have been designed for
maintenance free use. In the case an LED lamp or other
part replacement is needed please contact your authorized
service center.
: Extended
: High 1.67A/Low 1.92A /Halo 0.33 @12V DC
: 9-32V DC
: 50,000 Hours