User manual

E Managing System Images
Figure 37: Win32 Disk Imager
E.1.1. Burn System Image to CF/microSD Card
1. Insert CF/microSD card in your card reader and execute
vsimgtool --list
you should see the similar output:
>vsimgtool.exe --list
VSImgTool 1.0
Available devices:
PhysicalDrive2 Size: 1024450560 bytes
2. to copy the complete image to the CF/microSD card on the PhysicalDrive2 execute
vsimgtool.exe 26082008_etch_complete.bin PhysicalDrive2
you should see the following output:
>vsimgtool.exe 26082008_etch_complete.bin PhysicalDrive2
VSImgTool 1.0
Image source: 26082008_etch_complete.bin
Size: 1008451584 bytes
Removable destination: PhysicalDrive2
Size: 1024450560 bytes
The data on the destination will be lost. Are you sure you want to continue? [yes/no]
>
3. answer with "yes" and the copying process will begin
4. at the end of the copying process you should see the elapsed time and the size of the burned/-
copied image
If your CF/microSD card has bigger capacity than the system image, you can just insert it in the
card reader and change the partition with some partition manager like Gparted
73
on your Linux
host.
73
http://en.wikipedia.org/wiki/Gparted
May 2014 OnRISC User Manual 86