User manual

C hwtest
C. hwtest
The test utility for the OnRISC hardware is provided in both BIOS and preconfigured Debian
system images and consists of the following test modules:
• Network
• MiniPCI
• Serial
• GPIO
• CompactFlash
• I2C and RTC
• EPLD
• USB
• CAN
• WLAN Button
Three modes can be chosen for the test execution :
1. userless - executes all tests and shows the statistics at the end
2. fully interactive - the user has to acknowledge each test
3. half interactive - all of the automatic tests such as Network, MiniPCI, Serial, EPLD, USB,
CAN and CompactFlash will be executed without user acknowledgment but GPIO and I2C
would ask for the acknowledgment
The parameters can be specified in the command line or stored in the configuration file
67
. Without
any parameter, the program will not execute any test. For the list of common parameters see Table
9.
For detailed information about options execute:
hwtest --help
67
To use configuration file execute hwtest --cfg=hwtest.conf
May 2014 OnRISC User Manual 76