User manual

B onrisctool.py
B.5. Get EEPROM Info
onrisctool.py shows hardware related data like MACs, serial number etc. stored in EEPROM if
called without parameters:
magic: 0xDEADBEEF
hw rev: 1.0
SerNum: 860102014
Prod date: 31.05.2013
SysId: 100
MAC1: 00:04:D9:8E:00:04
MAC2: 00:04:D9:8E:00:05
MAC3: 00:04:D9:8E:00:06
B.6. Setting LAN MACs from EEPROM
You can use in EEPROM stored MACs for internal LAN interfaces:
onrisctool.py --setlanmacs
Executing this command will set MAC1 and MAC2 to eth0 and eth1/usb0.
May 2014 OnRISC User Manual 75