User manual

9 Debian Installation

Figure 20: Low Memory Mode

9.3. Choosing CD-ROM

Debian Installer will try to ﬁnd a device driver for your USB CD-ROM. This could fail as for Debian

Etch installer. To select the device manually answer with ’No’ (see Figure 21). In the second dialog

say ’Yes’ to manually select your CD-ROM module. In the third dialog select ’none’. In the fourth

dialog press ’Enter’ to select /dev/cdrom device ﬁle to access the CD-ROM. The Debian Installer

will now scan your CD-ROM.

Figure 21: Detect and mount CD-ROM

9.4. Load Installer Components from CD

First you’ll see a dialog with the statement that the kernel modules were not found (see Figure 22).

It is due to the issue that all needed modules were compiled into the kernel. So answer with ’Yes’.

Additional components will be loaded.

Figure 22: No Modules Found Warning

9.5. Network Conﬁguration

In the next dialog the network conﬁguration will be executed (see Figure 23). Choose the network

interface to which the Ethernet cable is connected to. In the next two dialogs enter host and domain

May 2014 OnRISC User Manual 62