User manual

8 BIOS for KS8695 based Devices
8.8. View Board Information
Shows some board information (see Figure 17)
Figure 17: BIOS: View Board Information
8.9. Hardware Test
The hwtest program will be invoked for one cycle with the parameters listed in Table 7. For
detailed information about hwtest refer to Appendix C.
size 4096 modem
cycles 1 sero /dev/ttyS1
confirm seri /dev/ttyS2
serial io
net buz
gpio led
mpci sleep 1
cf testrtc
i2c eplddev /dev/ttyS1
epld eplddev /dev/ttyS2
usb usbmntdev /dev/sda1
Table 7: BIOS: hwtest parameters
8.10. Default Parameter
Sets all parameters to factory settings.
8.11. Exit
Leaves BIOS. If any parameters were changed, you’ll be asked to save the changes.
May 2014 OnRISC User Manual 59