Dual Red or Green Electronic Dot Sight Instruction Manual ©2007 VisionPlus®
INTRODUCTION: Congratulations on your purchase of a VisionPlus® Dual Red/Green Electronic Dot Sight. This is a quality product engineered to give you long service life and enhanced shooting enjoyment. This manual contains instructions to enable you to use your new sight properly. Please read this manual thoroughly and in its entirety to ensure you understand all the instructions contained herein before you begin to use your new electronic dot sight.
Rest the firearm on a solid support and remove the windage and elevation adjustment screw caps at the sight’s top and side. Turn the sight on and look through it at a paper target (with a safe backstop) 50 to 100 yards away. Using a screwdriver or coin, adjust the windage (to adjust horizontal bullet impact) and elevation adjustment (vertical bullet impact) dials to align the lighted reticle with the target.
A B C D E G F H PARTS LEGEND: A. Eyeball B. Objective End C. Rheostat with Light Intensity Adjustments D. Battery Compartment E. Elevation Adjustment Knob F. Windage Adjustment Cap G. Screws with Locking Nuts H. Mounting Base Your VisionPlus® Dual Dot Red or Green Sight comes with a limited 3 year warranty against manufacturer defect. VisionPlus® Dual Red/Green Electronic Sight Distributed by: Century International Arms, Inc. 236 Bryce Boulevard Fairfax, VT 05454 www.centuryarms.
