Operation Manual

vision semi touch
advanced car entertainment
5
Powered by: Vision Electronics
Mute (14)
Turn of sound.
Clear (15)
Remove input.
Power (16)
Press this button to switch on/off.
Note:
The player is equipped with an auto power on/off
function. Powering on the monitor will automatically
turn on the player, power off the monitor shuts down
the player.
Mode (17)
Choose between a DVD or external source
(not applicable).
Disp (18)
Playback information (title, chapter).
Play/Pauze (19)
Press this button for normal playback of the DVD/CD
or to pause it.
Next (20)
Play next chapter.
Zoom (21)
Enlarge image. Use the arrow buttons (27) to move the
image.
Stop (22)
Stop playing the DVD/CD. After pressing stop, you
enter the resume stop mode. Here you can continue
playing or stop playing by pressing once more.
FF (23)
Fast forward from 2x up to 20x faster. .
Back (24)
Play previous chapter.
Repeat (25)
Repeat the entire DVD/CD or just a chapter.
GoTo (26)
Quickly go to a desired part of the DVD/CD.
Enter + arrow keys (27)
To navigate through the menu and selecting your
choice.
Menu (28)
For displaying a menu on the DVD/CD when this is
programmed on the disc.
Vol + (29)
Raise volume.
Note:
- For the best sound increase volume to maximum
(memorized).
- Volume is normaly controlled via headphone(s)
Vol -(30)
Lower volume.
Note:
The vision system can be switched on and off by pres-
sing the on/off (1) of the video display console button
(see page 3).
Battery remote control
CR 20 25 li-bat. 3V button Cel