Ver 1.
INDEX 1. Before use/Caution Warranty and scope of responsibility Caution to use 2. Product structure 3. Product specifications 4. Part names 5. Major features 6. Installation sequence and procedure Caution before installation Installation sequence Installation procedure 7. Usage Startup Features and operation Video recording How to eject a memory card Error message guidance 8. Analysis software usage PC analysis software preparation VD Analyzer usage User configuration 9.
1. Before use/caution We are grateful for your choice for this product. The following contents describe the responsibility scope of warranty service covered by us and cautions to use this product. Before you use, full knowledge of the product is recommended before using. 1-1) Warranty service and responsibility scope We shall not be responsible for the damages caused by errors or data loss of this product, plus the damages while this product is being operated by a user.
1. Before use/caution - This product shall be installed strictly inside a car following the informed procedure during installation. Impurities on the car windshield can weaken the adhesive strength and can damage the product if the product drops because of weak adhesion. - This product is not water-proof. Be careful to avoid liquids or impurities entering the product. - In case of cleaning the interior side of a car, do not use chemicals or detergents.
1. Before use/caution - Keep or carry SD cards in a safe keep box because static electricity or other environmental elements can damage the data of the product. - SD cards are expendable supplies. After a certain usage period, normal recording can not be implemented because partial memory sectors can be already damaged. This product supports an in system automatic SD memory checking. Purchase a new card for stable recording.
2.
2.
3. Product specifications -Camera: 1 Camera (1.3M pixel CMOS digital camera) -Record resolution:, 1280×960 (HD) 15fps Max. / 640×480 (VGA) up to 30fps Max. -LCD: 2.4” Full color TFT LCD -GPT: built-in GPS module -Impact sensor: built-in 3-axis acceleration sensor (x-y-z, impact/sudden stop/sudden acceleration/sudden spin -Storage: SD memory card (SDHC : 4G ~ 16GB) -Audio recording: Microphone included (setting to record on/off ) -Sound: built in speaker.
4. Part names REC LED GPS LED Microphone RESET VIEW button PLAY button LCD Screen: it turns on while installing, car start-up, View/Play pressed.
5. Major features * Ordinary video record Recording automatically starts when the user starts up the car engine, booting the main system of the product. Recording and storing continue until the car engine stops.
6. Installation sequence and procedure 6-1) Caution before installation Check the cautions as follows before installation for safe installation and use. - Install the product in a bright and safe area. - Installation should be started after the car engine fully stops and car keys are ejected. - The power cable of the Vision Drive should be connected at the end of installation. - The product’s power shall be connected only to the cigar jack whose power ranges from DC12V ~ DC 24V.
6. Installation sequence and procedure 6-3) Installation - Fix the bracket to the Vision Drive groove and push it left to fix (push the Vision Drive left to detach the Vision Drive only) - Insert an SD memory card as shown in the left photo after the connection of the Vision Drive to the bracket. (To eject the SD memory card from the Vision Drive, the SD memory card can be automatically ejected if the SD memory card is pressed in / during power-off status of the car.
6. Installation sequence and procedure - Adjust the shot angle by moving the camera up and down. (Vision Drive’s LCD lights can be on for several minutes in case of power-on for safe driving. If the user needs longer checking time for LCD, turn on the LCD by pressing the VIEW button of the Vision Drive. The user shall return it to recording status by pressing the VIEW button after the checking activity finishes.
7. Usage 7-1) Startup - Check if the car engine is turned off and keys are removed. - Check if an SD memory card is inserted in the Vision Drive. - Start up the car - Normal recording starts when LCD is on, voice guidance is released and record preview is temporarily shown through the LCD screen after startup. (REC Lamp on) - GPS lamp-on can take from several seconds to minutes depending on the reception location.
7. Usage 7-3) Video recording - This product’s system records video continuously after normal startup. Ordinary recorded files are stored as “Normal” files, saving the recent 5 minutes. - In case that a certain level of impact is given to the car while driving or stopping the impact sensor is triggered and video files are stored as “Impact” files for over 25 seconds (10 seconds before the impact, 15-60 seconds after the impact) to a separate folder.
8. PC analysis program usage 8-1) PC analysis program preparation -Execute “VDAnalyer.exe” program copied in the SD card after the SD memory card is connected to PC. * An optional SD card reader (USB adaptor, SDHC compatible) shall be necessary in case there is no slot for SD cards (SD or SDHC) or PC does not support SD cards. (Additional cost) 8-2) VD Analyzer Program usage - Startup: The following screen is shown if VDAnalyer.exe in the SD card is executed after a SD memory card is connected to a PC.
8. PC analysis program usage - A file name is displayed as NoGPS-XXXXXX-X if there is no date or time data because of bad GPS reception. - File selection: If a desired file on the list is clicked, the screen shot shall be shown in the center of window. (Preview feature) - Video check: The date is displayed on the left bottom corner, the time is displayed on the right bottom and the speed is displayed at the bottom center. (The speed can not be displayed in case of bad GPS data.
8. PC analysis program usage - Map Linked: A map to display the driven position is shown on the right bottom corner in case that PC is connected to the Internet. (A map can not be shown if GPS data reception was not good at the accident scene even if the PC is connected to Internet) - Screen size edit: Full screen size of display for 1280 * 960 videos is supported if “full screen” icon on the right bottom corner of the program is clicked.
8. PC analysis program usage ③ Set the time length stored after impact. ④ Set the size of event files (and thus the size of normal file’s) partition to be stored. ⑤ Set to use audio recording or not (the default value is off ) ⑥ Set the volume of the alert tone. ⑦ Set the time zone and Daylight Saving Time of the user. ⑧ Set the vehicle and speed type of the vehicle. ⑨ Set the password.
9. Warranty service & Free after service (A/S) 9-1) Warranty service - Geo Cross Co., LTD., guarantees warranty service for our manufactured products according to consumer compensation regulations (the 2006-36 item, Ministry of strategy and finance declared) - Warranty service shall be provided by Geo Cross or designated partners on user’s request for warranty service for this product.
All rights regarding hardware, software, design, trademark and products are of the manufacturer. Illegal copy, process and distribution shall be restricted and shall be punished by law according to regulations of legal compensation for damage of intellectual property rights.