User manual

First select the

Preset point

then enter the

Dwell time

. Click the

Add

button to complete the setup. Users may

arrange the sequence of the

Preset point

and the

Dwell time

at each point as desired.

Note:

Cruise is the fastest speed for cameras to move to each preset point.

Auto Pan function and its setup

Only dome cameras support the auto-pan function. Auto Pan allows cameras to quickly move horizontally

between two points. Click the

Setup

button to the right of the

Auto

button on the PTZ control panel to enter

into

Auto setup

screen:

Specify the preset start/stop points and the camera pan speed. Click the

button to complete the setup.

Auto-pan moves cameras horizontally between the preset start point and the preset stop point rather than

simply from the preset start point to the preset stop point. Some dome cameras may not support this

Auto-pan

function. Users need to check with vendors in advance.