User manual

91
Turn On/Off Alarm
This lets the alarm functions be turned on /off as set in the CamSS System. At the triggering of each alarm, an
“Off (inactive)” alarm will turn “On (active)” and vice versa.
Trigger the camera to turn to a preset position
In addition to triggering an alarm, upon being triggered by an input signal, the CamSS input port triggering
function works in conjunction with the Preset position function of a dome camera to immediately turn the
camera to a preset point.
Click on the box to select the preset point function, then click the Setup button to enter the Trigger to preset
Setup window. Make sure that the respective settings of PTZ device were made during the camera setup.
(Refer to the Section 4.2). Otherwise, it can’t be clicked to hi-
light the camera to trigger or set the desired preset point and stay-time for the camera if the camera needs to
return to its preset position. Don’t click Delay time , if the camera is not to turn away from its preset point.