User manual

84
When the local CamSS System’s alarm is triggered or an alarm is received from a remote System, these
alarms will be logged into the alarm log by order of occurrence. The log sheet (table) will display the alarm
time (occurrence time), the name of the host that triggered the alarm, board name and camera name, alarm type
(i.e. local or remote), and the reason that the alarm was triggered (i.e. by intrusion into the motion detection
area, by video lost, or by the signal received from the input port).
Click the Open button to play the alarm video of the selected alarm log entry. To play the recorded alarm
video, double click on the desired alarm log entry. Nothing will happen if no video file exists. Click Delete or
Clear all to delete one or all of the alarm log entries.