User manual

Location:

Select a camera in the

Image Section.

Click

the

button in the

Camera Setup section

. The system

will show the camera location on the E-map.

Please r

efer to section 3.8 for details.

4.3 Camera Views

Full screen display

This displays the

CamSS

screens in the full screen display mode. Click the central button (the one with “+”

symbol) as shown in the illustration below:

To return to the original display, press the

ESC

key on the keyboard.

Enlarging part of the camera display

Part of the camera view may be enlarged (zoom in) by double clicking the left button of the mouse on it. It can

be enlarged further by double clicking it again and again until the camera view takes the whole Image Section.

At this point, if it is double clicked again, it will return to the initial view before the first enlargement. Below is

an example of the partial enlargement of a view.

Before enlargement: