User manual

56
Enter the file name and click the Save button to save the picture file.
Audio:
This button activates and deactivates the audio recording function. The button shown as indicates that
audio recording is in progress while the recording indicator light in the System
Status Section is green.
If the button is clicked again, it will turn to indicating that the audio function has been deactivated.
The recording indicator light of System Status Section will also turn off, showing that the audio recording has
stopped, and vice versa. A soundcard installed in the PC is a prerequisite to using this function. (Plug CamSS
2 channel Audio/Video directly into the audio input). It is recommended that a full-duplex soundcard be used,
as the playing of alarm sounds may be required while recording and audio recording are in progress. Be sure
that both the recording and playing functions on the soundcard work.
Note: For a system including a CamSS 4 channel card or a Cam SS 1 channel card, the audio recording will
work for only one of those cameras at any given time. To change cameras, the audio recording in progress
must be closed, and the new camera selected. This limitation does not apply to CamSS 2 channel
Audio/Video card.
Video Configuration:
Clicking this button will bring up a screen that allows changes to the video configuration of a camera. Simply
drag the respective buttons to adjust the image’s brightness, contrast, saturation and hue. Click the Default
Colors button to return to the system default settings.