User manual

53
- Snapshot: This makes the system take snapshots at a predetermined time interval. CamSS saves
the image files in a default folder named as “ d yyyymmdd” (“d20010726” in the diagram below),
while the default file name is formatted as “ pp10 hhmmss”. (In 10 the first digit stands for the
CamSS card number while the second digit is the camera number. For example, “10” stands for
camera No.1 of the card number 1 while “11” stands for camera. No.2 of the card No.2, and so on).
Snapshot files may be opened through the option of the
System Operation Section. Clicking the button will open the “Open file” window
displays.
(The last two digits of the file names in the window stand for the second that the snapshot was taken.
As the preset time interval is 10 seconds, the difference of these seconds is also 10). Alternatively, a
new file path and file name may be entered as desired. Please refer to Chapter 3 for the detail
descriptions.
4. When all of the schedules are set, click the Add button to add it to the schedule list.
Recording Schedule List:
- From: Displays the start date/time.
- To: Displays the end date/time.
- Repeat Mode: Displays the repeating mode (i.e. “Only once”, “Every day”, “Every Week” and
“Every month”).
- Record mode: Displays the “recording mode”.
V = Normal Recording
A = Synchronized Audio Recording
S = Snapshot
n = Snapshot time interval, i.e. takes a snapshot every n seconds
Note: Choosing at least one option between “normal recording” and “snapshot” is required. Normal recording
mode must be selected before audio recording can be. You cannot enable audio recording in snapshot mode.
Deleting a recording schedule
To delete a schedule, click on the desired schedule entry and then click the Delete button.
Deleting all of the recording schedules.
Click the Clear all button to delete all of the schedules.