User manual

Programming

The Recording Schedule

Enter the start date/time and end date/time into the

From

and

fields respectively. They may be typed

directly into the fields or click the up/down arrows to the right of each one.

Select “Repeat Mode”. The repeating frequency may be chosen: “Once only”, “Once a day (Everyday)”,

“Once a week (Every week)” or “Once a month (Every month).”

Once Only (Only Once):

Enter the start and end dates/time.

Once a day (Every Day):

The date fields are disabled because the option is “daily execution”.

Enter the start and end time.

Once a week (Every Week):

Entering the start and end days of the week/time is required. The

“date” field automatically changes to “Day of the Week” when it is clicked.

Once a month (Every Month):

The start and end days of the day/time are required. The “date”

field shows the day only but no year and month.

Note: If the desired schedule time crosses 12:00 midnight, it is recommended that the schedule be split into

two, e.g. Split PM6

:00:00~AM9:00:00 into PM6:00:00~PM11: 59:59 and AM12:00:00~AM9:00:00.

Recording Mode

Continue:

i.e. normal recording mode.

Audio Recording:

In case of a schedule conflict, the first programmed schedule prevails over

others, i.e. other schedules’ recording and audio recording are all cancelled. Please refer to “Audio

Recording” in the subsequent part of this chapter.

Note:

In the case of a

CamSS

4 channel

card with multiple cameras that activate audio recording, only the

card/camera of the smallest numbers can activate audio recording.