User manual

Please refer to

Audio Recording

in the subsequent section.

Modem select

This option is not supported yet.

PTZ control select

This option lets you select the PTZ control device. Clicking the

Select

button will bring up the following PTZ

control setup window. (The camera name, type, and address in the I/O Device window on the System

Operation Section must be set up in advance). Click the desired PTZ control device entry.

Note:

The corresponding camera in the

Image Section

needs to be selected before entering into this function.

The camera addresses must also be consistent otherwise two or more PTZ control devices that exist at the same

time may cause false control actions.

Alarm setup

Clicking

Enable Alarm

then

Setup

under the

Alarm Setup

frame will bring up the following Alarm Setup

window. (Refer to Chapter 6 for the details on setting up alarms).