User manual

47
Mode:
Camera mode setup works only when the camera is turned on.
1. When the camera is in both “recording” and “monitoring” mode it displays camera views.
2. When the camera is in “monitoring” mode but not in “recording” mode it displays camera views.
3. When the camera is in “recording” mode but not in “monitoring” mode it displays “WORKING” view.
4. When the camera is neither in “monitoring” mode nor in “recording” mode. The camera is disabled and it
displays “WORKING” view.
When the “Recording” mode is turned on, the recording indicator light in the Status Section is
green. When the recording mode is turned off, the recording indicator
light in the Status Section is turned off.
Motion Detection Setup
During recording, if a motion detection area is selected (by clicking on the original point, holding the left
button of the mouse, dragging it to the desired point, and then releasing the button.) the system then begins
motion detection in the selected area. There is no limit to the number of motion detection areas that can be
selected.
1. Sensitivity
The sensitivity of the alarm triggering can be adjusted depending on different operating environments, e.g. the
quality of the camera, distance, light, background light, and object size.
Note: High sensitivity may cause false alarms as well as increase the amount of data generated by recording.
In adjusting the sensitivity, it is recommended that the camera quality and the surrounding environmental
conditions be taken into account in order to avoid false alarms.
2. Number of changed pictures
The alarm will be triggered only if the number of variations occurring to continuous images exceeds this limit.
You may adjust this limit to avoid false alarms.
The mask area in the diagram below is the motion detection area. The green color frame means that no alarm is
triggered.