User manual
19
3.3.1 New User Setup
Simply select
New User
. Enter the properties of the new user into the screen (as seen below):
Note: Only the System Administrator can add, delete, or modify a user profile.
The setting for
“User Info”
is as follows:
1.
User Name:
type a user name into the box
2.
Password:
type the password into the box.
3.
Confirm:
enter the password again for confirmation
4.
User Type:
This enables the user to be defined as either a
Local
or a
Remote
user. (A remote user is one
who accesses the system with limited auditing through modems, LAN, Intranet or Internet.)
Auditing
is used to set up the user’s access auditing as described below. One or more of the following access
audits may be granted by checking the
boxes (
•)
in front of them. The access auditing is set as follows:
1.
Start/Stop
: Enables a user to access the
Start Recording
,
Stop Recording
function.
2.
System:
Enables a user to access
System Setup
and
Camera Setup
functions.
3.
File:
Enables a user to access
Playback
,
Search
,
Alarm Log
,
User Log
and
Load Picture
functions.
4.
I/O:
Enables a user to access the
I/O Device
Setup function.
5.
PTZ:
Enables a user to access PTZ control and Speed Dome Camera control functions.
6.
E-map:
Enables a user to access
E-map
functions.
7.
Remote Access: Enables a user to access the
Remote access
function.
8.
Camera selection:
This function is not available.