User manual

14
Mute: Turns off the output of the sound card.
Auto Scan: Enlarge the images being recorded in the Image Section in a preset
order. (Does not affect the operation of recording).
Log-in/Log-out: During the execution of the system, the user password is required
before system programs can be performed. If a user is away for a while and
wishes to deny others’ access to the system, he/she may log out of the
system. All system operations (functions) will then be shut down. Exiting
the system programs is not an option at this point. The system will not
work until the user logs back in with his/her password.
On-line Help: Provides on-line help for system operations.
2.2.3 Status Section
This section displays the status of the current system including:
- Host: Displays the name of the Host computer.
- Board name: Displays the name of the CamSS card selected in the Image Section.
- Camera name: Displays the name of the camera selected in the Image Section.
- From: Displays the start time of recording while in the recording mode. If no image is available
from the selected camera, it will be marked as “IDLE”. If an image is available but displays
“Monitoring” (No Rec.), it means that the selected camera is not in the recording mode.
- Current: Displays the current time.
- Database: Displays the current database for recording.
- Free: Displays the hard disk spaces available in the database.
- Status: Displays the recording speed and image bit rate per second of the selected camera.
2.2.4 Camera Setup Section
The detail descriptions are contained in Chapter 4 (Recording).