User manual

12
To set up or to control any of the cameras on this section, move the mouse to the desired camera view and
click the left button once to select the camera. Then, perform the desired control or setup.
Screen Enlargement: All of the images displayed in this section can be enlarged or reduced. First, move the
mouse to the desired image and double click on the image to enlarge it. The images may be re-arranged at this
time so as to accommodate the displays of all images.
Motion Detection Area Setup: To select the motion detection area, simply click and hold on the image then
move the mouse to select the desired area. Finally, release the mouse button, and the setup will be complete.
There is no upper limit to the number of motion detection areas for each camera.
2.2.2 System Operation Section
The three buttons on the most upper right portion of the System Section are as follows:
Minimize: Minimizes the main screen.
Full Screen: Enlarges the whole image area to a full screen display mode.
(Press the ESC key to return to original screen size.)
Exit: Exits the program.
About contains the copyrights and registration information of the product and info about
Cam SS 2000 technolgy.
Please follow the procedures below to complete the registration:
1. Click the Register button. The following dialogue box will appear:
2. Enter the user name and registration number then click the OK button.
a. Type the user name into the “user name” box.
b. Enter the registration number from the package box or the CamSS card.
Note: The registration number is case sensitive. Please enter the correct number. Also note the difference of
the alphabetic letter “O” and the numeric letter “0” (zero).