User manual
108
9.4 Other Remote Access Functions
According to different access auditing, the remote access provides different control functions. Other major
remote access functions are as follows:
1.
To Unmask the detection area
Click on the desired remote camera then click the
Unmask
button
on the
Camera
Setup Section
to cancel all the detection areas.
Dragging the mask area directly onto the remote images can also set up a new detection area.
2.
Board setup
If the remote
CamSS
System is not recording, its board settings may be changed. If the
remote system has already activated recording, this function will not work.
3.
Camera Setup
Click the
Camera Setup
button
on the
Camera Setup Section
. This allows change
to the camera name, image quality, sensitivity of Motion detection, number of changed
pictures, enable or disable alarm (setup is disabled), and enable or disable program schedule
(
schedule is disabled).
4.
Video Configurations
Click the
Video Configuration
button
on the
Camera Setup Section
to
change the remote video configuration as desired.