User manual

ManualsBrandsVision Controls ManualsComputer equipmentCam SS Version 5.01

100

101

102

103

104

105

106

107

108

103

Click

the

button, and select the

TCP/IP

option. Select the

CamSS Server

to connect. Double

click its name to connect to the

CamSS Server

. After connection is established, the

Status

field shows

Connected

as illustrated below:

Next, click the desired remote host on the

Host

menu of the

CamSS

Program to start the remote monitoring.

Note:

All of the

CamSS

systems connected to the same

CamSS Server

will be shown on the

Host

menu.

However, access auditing still needs to be granted by the remote hosts to perform remote monitoring at the

remote hosts. If a

CamSS Server

connects to many other

CamSS Servers, only the

CamSS

hosts under the

CamSS Server

that is directly connected will be shown on the

Host

menu.

9.2 Remote Access

Via Modems

Via Modem

means that the connection to the remote

CamSS

system is dialing out, through the modem,

directly to the telephone number of the remote

CamSS

system. If a modem is used to dial out to the Internet

and then connect to the

CamSS Server

from the Internet, it is

via TCP/IP

(instead of

Via Modem