User manual

101
Enter CamSS Server ’s IP address to connect the user name and password. Then, click the OK button to
establish the connection.
Through the connection between the local CamSS Server and the remote CamSS Server , all of the hosts can
establish remote access with each other.
Auto Start:
CamSS Server 3.0 supports the Auto Start program after the operating system starts up. Click the File
command and a pull-down menu will appear. Select Auto Start to enable the immediate auto-start of the
CamSS Server program after the computer powers up to match with the Automatically connect to server
function of the CamSS application program.
Note: When the CamSS Server is started, if a password is not entered within 10 seconds, it automatically
enters into the CamSS Server program and user information cannot be modified.
Shutdown CamSS Server:
Click Shutdown Server . The CamSS Server is now temporarily suspended and all connections are also
terminated. However, the program is not ended. The program will request the user to enter a password. The
connection display is shown as follows:
Exit CamSS Server Program
To exit the CamSS Server program, the program will demand that the user enter his/her password as a
confirmation in order to avoid accidental or unauthorized termination.