Instruction manual

57
Appendix B
B.1 Installing the Remote Head Camera
The remote head camera mount kit includes the hardware required to secure the remote
head camera to a mounting surface. The Lens Tube (item 6) is included with the kit, but is
not required for all applications. The Lens Tube is highly recommended for environments
where vibration may be present.
Figure B-1: Remote Head Camera Installation Diagram
1. Attach the remote head camera bracket (item 4) to the mounting surface (Figure 5-9).
2. Attach the remote head camera (item 5) to the remote head camera bracket using three M3 x
8mm Phillips head screws (item 3).
3. If required, slide the Lens Tube (item 6) over the remote head camera (item 5) and secure to
the remote head camera bracket (item 4), using four M4 x 18mm cap screws (item 1) and lock
washers (item 2).
4. Connect the Camera cable to the remote head camera.