Instruction manual

Installing In-Sight
®
5000 Series Vision Sensors
55
A.1.2 Enabling Hardware Handshaking Using In-Sight Explorer
1. Physically connect the I/O Expansion Module to the sensor, as described in sections 3.3 and
3.4.
1. Open In-Sight Explorer and log on to the sensor.
2. From the Sensor menu (Figure A-3), select Serial Port Settings.
Figure A-3: Accessing the Serial Port Settings
3. Select Hardware from the Handshake drop-down list (Figure A-4).
Figure A-4: Serial Port Settings Dialog
Refer to the In-Sight
®
Explorer Help file for details on using the Discrete and Serial Input/
Output functions in the In-Sight spreadsheet.