Instruction manual

Installing In-Sight
®
5000 Series Vision Sensors
45
5.2.5 Network Cable Specifications
The Network cable is used to connect the sensor to other network devices. The Network
cable can be connected to a single device or provide connections to multiple devices via a
network switch or router.
NOTE:
The wiring for this cable follows standard industrial Ethernet M12 specifications. This varies
from the 568B standard.
Table 5-10: Network Cable Pin-Out
Signal Name P1 Pin# P2 Pin# Wire Color
TPO+ 6 1 White/Orange
TPO- 4 2 Orange
TPI+ 5 3 White/Green
TRMA 7 4 Blue
TRMB 1 5 White/Blue
TPI- 8 6 Green
TRMC 2 7 White/Brown
TRMD 3 8 Brown