Instruction manual

Specifications

5.2.4 I/O Module Cable

The I/O Module cable (Table 5-9) is used with the optional 1460 I/O Expansion Module,

1450 I/O Expansion Module and 1350 I/O Breakout Module. The I/O Module cable connects

the sensor directly to the applicable I/O module via the DB15 connector. When the 1460 I/O

Expansion Module, 1450 I/O Expansion Module or 1350 Breakout Module is used, all power

and communication lines used by the sensor are connected using the I/O Module cable.

NOTE:

Refer to the 1460 I/O Expansion Module, 1450 I/O Expansion Module or 1350 Breakout

Module Installation and Reference manual for more connection information.

Table 5-9: I/O Module Cable Pin-Out

P1 Pin# Signal Name P2 PIN#

1 Power, +24 VDC 1

2 Trigger + 2

3 Trigger - 3

4 High-Speed Out 0 4

5 High-Speed Out 1 5

6 RS-232 Receive (RxD) 6

7 RS-232 Transmit (TxD) 7

8 Ground 8