Instruction manual

Specifications
38
5.1.3 Remote Head Vision Sensor Specifications
Table 5-3: In-Sight 5400R Sensor Specifications
Specification In-Sight 5400R
Minimum Firmware Requirement In-Sight version 3.2.0
Memory Job/Program 32MB non-volatile flash memory; unlimited storage via remote network device.
Image
Processing
64MB
I/O Trigger 1 opto-isolated, acquisition trigger input.
Remote software commands via Ethernet and RS-232.
Discrete Inputs
8 inputs available, using the optional 1450/1460 I/O Expansion Module. Unlimited
inputs when using an Ethernet I/O system.
Discrete Outputs 2 built-in, high-speed outputs.
8 outputs available, using the optional 1450/1460 I/O Expansion Module.
Unlimited outputs when using an Ethernet I/O system.
Status LEDs Power, Network Status, Network Traffic, 2 user configurable.
Communications Network 1 Ethernet port, 10/100 BaseT, TCP/IP protocol. Supports DHCP (factory default)
or static IP address.
Serial RS-232C (4800 to 115,200 baud rates; 1200 to 115,200 baud rates when
connected to a 1450/1460 I/O Expansion Module).
Power 24VDC ±10%, 250mA maximum.
Mechanical Material Die-cast aluminum housing.
Finish Painted.
Mounting Four M4 threaded mounting holes on back of sensor.
Dimensions 34.0mm (1.34in) x 136.0mm (5.35in) x 61.4mm (2.42in.)
Weight 294.8g (10.4oz)
Environmental Temperature 0°C (32°F) to 55°C (113°F) (Operating),
-30°C (-22°F) to 80°C (176°F) (Storage)
Humidity 95%, non-condensing (Operating and Storage)
Protection IP67
Shock 80 G shock per IEC 68-2-27.
Vibration 10 G from 10-500 Hz per IEC 68-2-6.
Regulatory Compliance CE, FCC, UL, CUL.